2T2R 5G Cellular Signal Boosters
Introduction
A 5G cellular signal booster provides a simple, rapidly-deployed and low-cost solution to extend 5G&4G signals to dead zones or weak signal coverage areas. It receives 5G/4G signals from cell towers outdoors, amplifies them, and redistributes the amplified signals indoors for seamless connectivity and uninterrupted communication.
Hocell 2x2 MIMO 5G cellular signal booster is a high-performance 5G pico repeater which supports 2T2R, with two input antenna ports and two output antenna ports. The maximum 5G speed reaches 400+Mbps, which is double of a single-channel 5G cellular signal booster.
Considering that 5G signals often struggle to penetrate indoor areas because of the much higher frequencies adopted by 5G technology, 5G cellular signal boosters are being commonly used in underground or semi-underground spaces, homes, shops and markets, elevators, hotel and hospitality, small factories, etc.
Key Features
1. 5G output power up to 23dBm;
2. Dual channel TDD NR 3500 to realize 2T2R 5G MIMO, higher 5G internet speed;
3. Self excitation detection and elimination function;
4. Optional remote monitoring function, supporting local PC connection;
5. Small in size, easy to install.
Installation Diagram
Hocell dual-channel cellular signal booster consists of four parts: dual-polarized donor antenna, indoor coverage unit, dual-polarized service antenna and feeders. The donor antenna receives two streams of 5G signal from outdoor base station and connects to the two input ports of the indoor coverage unit through the feeders. The indoor coverage unit connects to the dual-polarized service antenna with two output ports, and provides 2x2 MIMO 5G coverage for personal terminals and IOT devices indoors.
Figure 1: Installation diagram
Specifications
Table 1: FDD LTE 1800 Parameters
|
Item |
Uplink |
Downlink |
|
Frequency Range |
1735 - 1785 MHz |
1830 - 1880 MHz |
|
Bandwidth |
50 MHz |
50 MHz |
|
Max. Gain |
60±3 dB |
65±3 dB |
|
Gain Control Range |
25 dB |
|
|
Automatic Level Control |
≧ 20 dB |
|
|
Gain Flatness |
≦ 10 dB |
|
|
Output Power |
17±2 dBm |
17±2 dBm |
|
Spurious Emission |
≦ -36 dBm/100KHz (9KHz ~ 1GHz) |
|
|
≦ -30 dBm/1MHz (1GHz ~ 12.75GHz) |
||
|
EVM |
≦8% |
|
|
Noise Figure |
≦ 12 dB |
|
|
VSWR |
≦ 2.5 |
|
|
Group Delay |
≦1 uS |
|
Table 2: TDD NR 3500 Parameters
|
Item |
Uplink |
Downlink |
|
Frequency Range |
3400 - 3600 MHz |
|
|
Bandwidth |
200 MHz |
|
|
Max. Gain |
65±3 dB |
70±3 dB |
|
Gain Control Range |
25 dB |
|
|
Automatic Level Control |
≧ 20 dB |
|
|
Gain Flatness |
≦ 7 dB |
|
|
Output Power |
15±2 dBm |
23±2 dBm |
|
Spurious Emission |
≦ -36 dBm/100KHz (9KHz ~ 1GHz) |
|
|
≦ -30 dBm/1MHz (1GHz ~ 12.75GHz) |
||
|
EVM |
≦3.5% |
|
|
Noise Figure |
≦ 12 dB (Channel 1) / ≦ 10 dB (Channel 2) |
|
|
VSWR |
≦ 2.5 |
|
|
Group Delay |
≦1 uS |
|
Table 3: Indoor Coverage Unit Parameters
|
Item |
Parameter |
|
|
Indicators |
Power, Synchronization Status, Alarm, Downlink Output Power |
|
|
RF Connector |
SMA-Female |
|
|
Impedance |
50Ω |
|
|
Power Supply |
Input: AC 100-240 V; Output: DC 12 V/ 2 A |
|
|
Power Consumption |
≦ 15 W |
|
|
Dimensions |
186*186*30 mm |
|
|
Weight |
0.9 kg |
|
|
IP Rating |
IP30 |
|
|
Operating Temperature |
0 to 40 ℃ |
|
|
Control & |
Local |
Via Micro USB Port |
|
Remote |
Via Wireless Modem (optional) |
|
Note: Frequency bands could be customized according to global customers’ requirements.
Related products:
Single-Channel 5G Cell Signal Boosters
