5G Indoor CPE M130 (Unisoc V510 & Wi-Fi 6)
Overview
The 5G CPE M130 is a high-performance 5G indoor wireless router based on Unisoc V510 modem, which supports 5G NR (SA&NSA), TDD-LTE and FDD-LTE. It converts cellular network data into Wi-Fi and wired network port data, supporting 2 Gigabit LAN ports, 2.4GHz & 5GHz dual-band WIFI (Wi-Fi 6, 802.11ax). It is suitable for home or commercial scenarios that require rapid deployment of WIFI hotspots and wired broadband networks.
Key Features
With Unisoc IVY510 modem, it has powerful 5G mobile network performance and works with legacy 4G networks worldwide.
Wi-Fi 6 (802.11ax)
OFDMA and DL MU-MUMI enable faster and simultaneous transmission to more devices with lower latency. Wi-Fi 6 provides a clearer and stronger Wi-Fi signal to achieve seamless coverage and higher energy efficiency. With dual-band 4 spatial streams, the theoretical download speed reaches up to 1800 Mbps (600 Mbps + 1200 Mbps), allowing you to enjoy a 4K video and online games without lag.
Hybrid MESH+ Networking
The CPE inherits the mesh technology and supports “wired / wireless” hybrid networking. It’s so easy and convenient to cover more areas and all corners by adding one more MESH+ node (another series of router) to have a seamless whole-home coverage.
Hardware & Radio Specification
|
Chipsets |
Unisoc V510, MT7621AT |
|---|---|
|
Flash |
16MB |
|
RAM |
2Gb DDR3 |
|
5G Standard |
3GPP Release 15, Sub-6 GHz |
|
5G Network Mode |
NSA/SA |
|
5G/4G Data Rate |
5G SA Transmission Speed: DL 2Gbps / UL 1Gbps 5G NSA Transmission Speed: DL 2.2Gbps / UL 576Mbps LTE: DL 600Mbps, UL 150Mbps (Note: Actual speed depends on operator network and environment) |
|
5G Frequency Bands |
5G NR: n1/n28/n41/n77/n78/n79 MIMO Downlink：4 × 4 MIMO on n1/n41/n77/n78/n79, 2 × 2 MIMO on n28 Uplink：2 × 2 MIMO on n41/n77/n78/n79 |
|
4G&3G Frequency Bands |
LTE Category: Downlink Cat 12/ Uplink Cat 13 LTE-FDD B1/B2/B3/B5/B7/B8/B20/B28 LTE-TDD B34/B38/B39/B40/B41 MIMO Downlink: 2 × 2 WCDMA B1/B2/B5/B8 |
|
Wi-Fi Frequency |
2.4GHz&5.8GHz |
|
Wi-Fi Standard |
802.11a/b/g/n/ac/ax, 2 x 2 MIMO |
|
Wi-Fi Throughput |
2.4GHz: 600Mbps; 5.8GHz: 1800Mbps |
|
Wi-Fi Maximum Transmit Power |
2.4GHz: 16dBm; 5.8GHz: 18dBm |
|
Wi-Fi Connection |
>100 clients |
|
Modulation Mode |
5G: GMSK/8PSK/BPSK/QPSK/16QAM/64QAM/256QAM WI-FI: 1024-QAM / OFDMA |
|
Antennas |
4 Built-in 5G/LTE antennas 2 Built-in 2.4GHz Wi-Fi antennas 2 Built-in 5.8GHz Wi-Fi antennas |
|
Interfaces |
2*GE LAN, 1*GE WAN, 1*Power Adapter Port, 1 SIM card slot |
|
Button |
Mesh Button (short press, networking light flashes blue) Reset Button (Long press 10 seconds to restore the factory settings) Breathing Light Button |
|
Networking Extension |
MESH |
|
LED Indicator |
Power, 4G Signal, 5G Signal, Wi-Fi Signal, Breathing Light |
|
AC/DC Power Supply |
AC (input): 100V~240V,50Hz~60Hz; DC (output): 12V/2A |
|
Power Consumption |
＜24W |
|
Environment |
Operating Temperature：0℃～+45℃ Storage Temperature:-20℃～+70℃ Humidity：5％～95％（Non condensation） |
|
Dimension |
108x108x216mm |
|
Weight |
680g (Excluding accessories and package)/1.35kg（Including accessories and package） |
Software Specification
|
Software Functions |
|
Firewall |
|
IPV4 |
|
IPV6 |
|
Smart QOS |
|
Parent Control |
|
UPNP |
|
VPN （L2TP VPN client, PPTP VPN client） |
|
APN |
|
DHCP |
|
DDNS |
|
DMZ |
|
Port Mapping |
|
MESH (Private Mesh, Qualcomm Mesh, Wi-Fi-SON) |
|
APP |
|
PIN management |
|
SIM card authentication |
|
Static route |
|
NAT/router mode |
|
TR069 |
|
WebUI update |
|
Wi-Fi encryption (Open, WEP, WPA2-PSK, WPA3-SAE, WPA/WPA2-PSK, WPA2-PSK/WPA3-SAE) |
|
Wi-Fi band aggregation |
|
Backup/restore settings |
Appearance and Interfaces
