5G CPE M131 (5G & LTE Wireless Router)
Overview
The 5G CPE M131 is a high-performance 5G indoor wireless router based on Unisoc IVY510 5G modem, which supports 5G NR (SA&NSA), TDD-LTE and FDD-LTE. It converts cellular network data into WIFI and wired network port data, supporting 4 Gigabit LAN ports, 2.4GHz & 5GHz dual-band WIFI. It is suitable for home or commercial scenarios that require rapid deployment of WIFI hotspots and wired broadband networks.
Application
Technical Specification
5G / 4G Cellular
1) 5G Network Modes: SA (standalone), NSA (non-standalone), 5G NR FDD, 5G NR TDD
2) 4G Network Modes: TDD-LTE, FDD-LTE
3) 5G Bands: n1/n3/n8/n28/n41/n77/n78/n79
4) 4G Bands: FDD-LTE, B1/B2/B3/B5/B7/B8/B20/B28A/B28B/B32; TDD-LTE, B34/B38/B39/B40/B41
5) 5G/4G Standards: 3GPP Release 15 / Cat12
6) 5G Downlink Data Rate: up to 2Gbps (Theoretical speed)
7) 5G Uplink Data Rate: up to 1Gbps (Theoretical speed)
8) MIMO: 5G DL MIMO 4*4, 5G UL MIMO 2*2, LTE MIMO 2*2
9) 5G/4G TX/RX: 2T4R/1T2R
10) Output Power @25℃: 5G NR, 23+-2dBm; LTE, 23+-2dBm
11) Antennas: 4 built-in 5G NR antennas, 2 built-in 4G antennas TX/RX
1) Working Radio: 2.4GHz MIMO 2*2 + 5GHz MIMO 2*2
2) Wi-Fi Standard: IEEE 802.11b/g/n/ac
3) Antennas: 2 built-in 2.4GHz antennas & 2 built-in 5GHz antennas.
4) Wi-Fi Output Power: 16dBm@2.4G, 18dBm@5G
5) Wi-Fi Maximum Users: 2.4GHz, 32; 5GHz, 32
Hardware Specification
1) Chipset: UNISOC IVY510 (5G/LTE), Realtek 8198D (Wi-Fi)
2) Memory: 2Gb Flash + 4Gb DDR3
3) Ethernet: 4 *10/100/1000 Mbps
4) 1*SIM (3FF)
5) Buttons: Power, WPS, Reset
6) LED Indicators: Power, WiFi, 4G Signal, 5G Signal, Signal quality
7) General
–Power Consumption:<24W
–Power Supply: AC100V~240V, 50Hz~60Hz, DC 12V/2A
–Working temperature: 0℃～40℃, Storage temperature: -20℃～70℃
–Dimensions:117x117x180mm
–Weight:580g
Resources
Datasheet: Hocell Indoor 5G CPE M131 Datasheet V2.0.pdf
User Manual: Hocell 5G CPE M131 User Manual_English _v1.1.pdf
